Arzum AR 1043 MIO GLASS, Инструкция по эксплуатации

Страница: 7 / 15

12 ARZUM
13 ARZUM
• Place the transparent intermediate cover onto
its housing over the bowl.
This unit does not operate, unless the
transparent intermediate cover is located onto
the bowl.
• Locate the main body
/motor unit on this
transparent intermediate
cover so that it can be inserted into the slots. After
ensuring that the main body is secured on the
transparent intermediate cover, connect the mains
plug to the wall socket and initiate the blades by
depressing the operation switch.
NOTE: The starting button of our appliance is 2
speed step; it will operate slowly when you slowly press on the button,
and it will operate fastly when you hardly press on the button.
• If any non-chopped pieces are left after operation, mix such materials
with a spatula and try again.
• You can break ICE thanks
to the double-folded and
double-sided stainless steel
blades of your Arzum Mio
Glass Chopper.
• After you have finished
your work, immediately
rinse the bowl, transparent
intermediate cover, and cutting blade, and wipe dry
them with a damp cloth.
• Before operating your unit, remove the seeds of
those fruits such as peaches, apricots, plums, etc.,
and peel those dried fruits/nuts such as almonds,
hazelnuts, walnuts, etc.
• When using your unit do not fill the bowl up to
the brim. Follow the max. capacity indication.
CARE & CLEANING
In order to ensure many years of proper operation, due care and cleaning
of your Arzum Mio Glass Chopper will be too easy and short.
• Ensure that the mains plug is disconnected from the wall socket before
cleaning the unit, and allow it to cool down for a while.
• It is very important for you to rinse the accessories immediately after
using, so that the overall cleaning of the appliance can be easier.
• Main body/ Motor unit; NEVER immerse into water
or other liquids. Wipe the outside with a slightly damp
cloth and then dry thoroughly.
• You can clean the double
sided stainless steel blade,
beating apparatus, transparent
intermediate cover, and the
bowl with tepid water and soap.
• After each use, clean the cutting blade and
then always wipe it dry.
• Take care when cleaning the blades, as they are very sharp.
• Repeat the same steps after each use.
EN