6
ARZUM
7
ARZUM
• You can chop up to 500 grams of food in 10
seconds by using your appliance. Such foods may
be those including dry fruits and hard vegetables
such as carrots and celeries, and soft vegetables
such as onions, garlic, and parsleys, as well as
various cheeses, ham, salami, cooked meats
without bones, cooked or uncooked fishes, or
various fruits.
• Before operating your unit,
remove the seeds of those
fruits such as peaches,
apricots, plums, etc., and peel
those dried fruits/nuts such as
almonds, hazelnuts, walnuts,
etc. Prefer to use meat without
bones and nerves.
• You can break ice thanks
to the double-folded and double-sided stainless steel blades of your
Arzum Maximin cup in cup chopper.
• After you have finished your work, immediately rinse the bowl,
transparent intermediate cover, and cutting blades, and wipe dry them
with a cloth. Be careful while cleaning blades as they are sharp.
Mixing and Beating
• After detaching the main body/motor unit and
transparent intermediate cover from the bowl,
locate the beater onto its housing (the centering
spindle) in the bowl.
• Put any material to be mixed or beaten into the
bowl.
• Place the transparent intermediate cover tightly
onto the glass bowl with a capacity of 1500 ml.
Locate the main body (motor) on this transparent
intermediate cover so that it can be inserted into
the slots. After ensuring that the main body is
secured on the transparent intermediate cover,
connect the mains plug to the wall socket and
initiate the blades by depressing the operation
switch.
Chopping
• After removing the main body and transparent intermediate cover from
the bowl, remove also the protective case from blades and then place
the double-sided stainless steel blades, one on top of the other, and
then locate them onto its housing (the centering spindle) in the bowl.
• Put any material to be chopped into the bowl (if large, dividing into 2 or
3 pieces).
• Place the transparent intermediate cover
onto its place of the bowl, the holes of the
transparent intermediate cover must come to
handle of the bowl.
• This unit does not operate, unless the
transparent intermediate cover is located onto
the bowl.
• Locate the main body (motor unit) on the
intermediate cover and after ensuring that
the main body is secured on its slot properly,
connect the mains plug to the wall socket and
initiate the blades by pressing the operation
switch.
• If you push the operation switch at intervals instead of continuously,
you get quickly a better chopping result.
• If any non-chopped pieces are left after operation, mix such materials
with a spatula and try again 2-3 times at intervals.
• After chopping operation, remove the main body and transparent
intermediate cover from the bowl. You can pour the materials after
taking the cutting blade out by holding the plastic part.
EN
