6
ARZUM
7
ARZUM
Mixing and Cutting With Hand Blender
• Mount the stainless steel blender accessories to the main body by
turning until it fits well in its place, without tightening too much.
• Connect the mains plug to the wall socket.
• Use special measuring receptacle or a deep pot in order to obtain the
best results from your hand blender and to prevent the material from
spreading out.
• Cut the materials into small pieces and move such pieces up and down
through depressing the operation button of your hand blender in the
material.
• By using stainless steel blender accessories
of your appliance you can prepare sauces, milks,
fruit juices, soups, cocktails, and milkshakes; make
cooked vegetables, fruits, and mashed potatoes
(for example, baby foods, etc.); mix such soft
materials as butter, eggs, flours, and liquid oils (to
make mayonnaise, omelets, dessert, and dough),
and mix any foods being cooked in the oven.
• As soon as after you have finished your work clean the stainless steel
blender accessories and wipe dry with a damp cloth.
WARNING
• Turn on your appliance only after the ingredients are put into it, and
NEVER
take any materials out of the unit unless it completely stops.
Beating and Mixing
• By means of using the beater accessories of your
Arzum Provita Hand
Blender Set With Zirconium Blade
you can easily
make the preparations such as cake dough, omelet,
crepe dough and mayonnaise.
• Mount the beater accessories firstly by pushing
until it fits well in its place in order to use the beater
accessories.
• Turn the beater adapter to the motor block to
mount without tightening too much.
• Plunge your hand blender in upright position into the mixing vessel
or a deep raw vessel in which you previously placed the materials
and connect it to the outlet. Press the operation button and turn the
materials with the up-down and circular movements.
• After every use,
ALWAYS
dismantle the beater wires from the beater
adapter and wash with the detergent water. It will be enough for you to
wipe the adapter with a damp cloth. Excessive water may enter in the
appliance and may cause it to be damaged.
WARNING
1- ALWAYS operate your hand blender in the upright position.
2- NEVER operate the appliance in an empty vessel or outdoors.
3- Do not press with your appliance on the material hardly
4- Never immerse the body of your blender into water.
Chopping with the Chopper Bowl
• You can make cutting very easily and practically by means of the
chopper accessory with the 700 ml capacity
of your
Arzum Provita Hand Blender Set With
Zirconium Blade.
• After defrosting the frozen goods and breads,
remove the shells of the shelled foods and cut the
meat parts without bones.
• Locate the cutting blades of your appliance onto
the shaft in the middle part of the case.
• Place the foods to be cut inside of the case, ensuring that the foods
will be of the equivalent level and without piling up. Do not put foods over
the recommended amount; otherwise your appliance may be damaged.
• Put the chopper adapter of your device onto the case, ensuring to
insert in the slot located on the claws in the adapter. If it is operated
without placing completely, then the blade may be deformed.
• Place the motor/main body of your hand blender in the place on the
adapter without tightening too much.
• You can start the operation by means of pressing the Turbo button
which is located on the motor body or pressing the operation button.
• Once you have finished your work, rinse the bowl and double-sided
stainless steel blade with water and detergent, and store the blade in the
bowl.
EN
