12
ARZUM
13
ARZUM
Assembly of the Base Attachment
• Loose 1 sets of screws, washers and spinning washers which are
beforehand fitted in the center section on the base and assembly the
tripod exterior pipe onto the base enclosure with these fastening.
(1)
Loose the height adjustment bracelet, lift the height adjustment pipe to
the max height and prevent the height adjustment pipe from slipping into
the tripod exterior pipe, then screw out the height adjustment bracelet.
(2)
• To attach the base plastic cover (cover for the basa enclosure), slide
the decorating cover down the tripod exterior pipe.
(3)
• Reattach the height adjustment bracelet.
(4)
• From the tripod exterior pipe loosen the height adjustment bracelet
and adjust the height adjustment pipe to the desired height.
(5)
NOTE: If you can›t find the height adjustment pipe, it slides inside the
tripod exterior pipe. You can pull it out from the tripod exterior pipe.
ATTENTION: Do not make the assembly if your ventilator is broken or
damaged.
Assembly of the Body on the Bases
• Pass the slot under the body into the tripod exterior pipe and tighten
body connection screw from the back.
• Always disconnect your appliance from the outlet when you;
- Assemble and dissamble the appliance,
- Perform its maintanance and cleaning,
- Relocate the appliance even if for short distances,
- Do not use the applıance.
• Do not use the dangerous chemıcals and abrasive cleaners in order to
clean your applıance.
•
NEVER
attach the plug of your ventılator to the outlet and use unless
it ıs assembled in complıance with the ınstructıons of assembly.
• Make sure that the speed adjustment button ıs at "O" posıtıon before
attachıng the plu2 of your applıance to the outlet.
• Always put your applıance on a stable flat surface, and keep it away
from the watery places such as bath tub, swimming pool and shower.
• When your applıance ıs in operation,
NEVER
touch the moving parts.
Do not approach your hands, haırs,dressın2s and any tool.
• Keep your applıance away from the srnall children.
•
NEVER
operate your applıance wth wet hands.
• Do not attach the accessones whıch belon2 to the otherventılators to
your applıance.
• Make sure that the plugged cord will not hang down from the table or
counter and will not touch the hot surfaces.
• Make sure that the speed adjustment speed is at "O" position and the
plug is disconnected from the outlet before relocating your product.
• Do not use your ventilator in the envronments where they catch fire
easily and closed to such flammable material. It may be very dangerous.
• Do not make any intervention with your appliance except for its
cleaning and maintenance works. lf the cable or plug of your appliance
fails or damaged because of falling down or any other reason, then do
not use your appliance. Do not attempt to repair it by yourself. Consult
Arzum Authorized Service.
Pay attentı on to use the original spare parts
only in your appliance.
• Use your appliance as recommended and for its intended purpose. Do
not assemble it on the wall of ceiling.
ASSEMBLY OF YOUR ARZUM FENİKE
STAND FAN
• You can make assembly of your ventilator only by rneans of using a
big flat screwdriver.
1
Loosen
Loosen
Pinch
4
2
5
3
EN