Arylic WBC65, Руководство пользователя

Страница: 8 / 24

5
6. Installation
Tools needed for installation
Quick installation guide
STEP 1 STEP 2
Speaker wire
● Pencil
● Drill
● Tape Measure
● Where is the best place to install the speakers
● Where do the speakers sound the best?
● Try to separate the speakers 6- 10 feet apart.
● When placing the speakers in the ceiling, try to install
themso that the fxed 150 angle woofer is pointed towards
the main listening area. (For LCR model only)
● Ifyou intend to paint the gills, try to do so before
installation.
Trace along the inclusive template. Cut along the
traced line using a drywall saw or rotary drill. A simple,
inexpensive drywall saw (about $10 at your local hardware
store) is the best choice for beginners. Caution: This is the
most important part ofthe entire installation. If you are not
certain whether any obstructions exist behind the desired
mounting area, you should start by cutting a small hole in
the center of your penciled mounting hole with a drywall
saw. Use a piece of sandpaper to sand down the cut out
edge for a smoother contour. (See Diagram 1 and Diagram 2)
Run the cable into the cut out location while leaving an
extra two feet to make the connection to the speaker
easier. Strip back approximately /2 inch of the speaker
cable insulation and twist the copper wires tightly for easy
insertion. On the back of the speaker, press down on
the gold-plated compression terminal to reveal the "eye"
and insert the speaker cable through the eye for secure
connection. Release the compres-sion terminal to lock
each cable securely.
Diagram 1:
Cutout tracing
Diagram 2:
Cut Out
To determine the length and the gauge of speaker wire,
you will need to - Measure the distance from the receiver/
amplifier to the speakers.
● Measure the distance from the receiver/amplifier to the
speakers.
● Always buy more than you think you would need.
● Equal wire lengths should always be used to maintain an
equal balance in sound volume.
● Sound quality is lost when using thin wire gauge over a
long distance.
18AWG minimum - for distances up to ........................ 10 ft
16AWG - from ...................................................... 10 to 50ft
14AWG - from .................................................... 50 to 100ft
● Wire cutter
● Philips-head
screwdriver
● Sandpaper
● Utility knife
● Safety eyewear
● Gloves