4.3 Connection via LAN
Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds. (Note: the cell phone and the
device must be in the same network)
4.4 Bluetooth
To use bluetooth, please switch to bluetooth via app or by remote controller, then find the bluetooth device SoundSystem_XXXX from
your phone bluetooth setting and pair it.
4.5 USB Audio
Power up and connect the Up2Stream Plate AMP to your PC with USB cable. The PC will automatically discover a USB sound card,
and when you activated it as the system main output, the PC will send the audio output over Up2Stream Plate AMP in digital
(44.1KHz/16bits). You can stream to other Up2Stream devices over multiroom connection. NOTE: there’s about 3 seconds delay for
multiroom slave devices.
4.6 Up2Stream ACPWorkbench (Sell Separately)
Connect the Up2Stream device to your PC with USB. Open the program ACPWorkbench (only support Windows), and you can tune
audio effects conveniently, including Music Noise Suppressor, Virtual Bass, Stereo Widener, Exciter, 10 bands EQ, Configure output
channel and PIN configs. After editing the audio effects, you can save the changes to the device so the tuned effects will remain. You
can get more information from our website.
4.7 Firmware Update
The application will notify you in app when there is a new firmware version available. It is recommended to update firmware
whenever available as this might not only correct bugs or improve security, but also can add new features or services.
Attention for Android users Different brand mobile phones may ask you to allow to use SoundSystem WiFi network, please choose
yes, if not, you may not able to set up successfully. It may also ask you to authorize other things, please choose yes or it may affect
your usage.
*If you change to another router, or the password of the connected router has been changed, please long press the volume knob for 3
secs in WiFi mode to reset the connection.
Support: [email protected]
www.arylic.com
4STREAM App
:
arylicme
YouTube:Arylic
5. Specification
Scan the QR codes below for more
Interfaces
AUX (3.5mm)
USB
Audio Input
Audio Output
Network
Bluetooth 5.0
Subwoofer Output
Line out
WiFi
LAN
Stereo
Power Supply
Volume Knob
Signal Noise Ratio
THD+N
Crosstalk
Size
Weight
AC100-240V 50/60Hz 1A
Adjust volume
≥85dB @ max
<0.9% @ 1KHz, 1W
>55dB @1KHz
135.3 x 85.3 x 77.3 mm
0.3kg
40W x2 @4Ω
20W x2 @8Ω
Max 1V RMS input
for PC connection (16bit/44.1kHz)
and ACPWorkbench tuning
AAC, SBC
20-300Hz Max 2V RMS
Left channel speaker output
2.4G
RJ45
Speaker Power
General
