5. Specification
Support: [email protected]
www.arylic.com
4STREAM App
Facebook: arylicme
YouTube:Arylic
Scan the QR codes below for more
4.6 Multiroom Function
You can group multiple devices to form multiroom/multizone in
4Stream APP. Just click on the + icon on one of the devices
and select other devices as slave device. The master device
then can stream music and sync to all slave devices in different
rooms.
4.7 Web Player Interface
Enter the ip address of the device in a web browser and you can access the web player interface. The web player can let you
play/pause the current song, go previous or next song, control the volume, access the Pre-set songs you define in 4Stream APP, enter
internet radio URL to listen to radio, setup wifi connection, setup static ip address, do manual firmware update and factory reset.
*You can check device ip address in 4stream app, click on device settings icon and select speaker info.
**If you want to setup wifi in this interface, connect this device
(SSID: SoundSystem_xxxx) to your phone/pc wifi directly, the default ip address is 10.10.10.254.
***The default password is admin.
4.8 Up2Stream ACPWorkbench (Sell Separately)
Connect the device to your PC with USB cable, open the windows
program ACPWorkbench and you can tune audio effects
conveniently in real time, including music noise suppressor, virtual
bass, stereo widener, exciter, 10 bands EQ, configure output
channel and PINs definition. After editing the audio effects, you
need to save the changes to the device for the effects remain. You
can get more information from our website.
4.9 Firmware Update
The application will notify you in app when there is a new
firmware available. It is recommended to update the firmware
whenever it is available, as this might not only correct bugs or
improve performance, but also might add new features or
services.
4.5 USB Audio
Power up and connect the device to your PC with USB cable. The
PC will automatically discover a USB sound card and when you
select it as the system audio output, the PC will send the audio
output to the device in digital (44.1kHz/16bits). You can stream
audio to other Up2Stream devices over multiroom function.
Note: There is about 3 seconds delay for multiroom slave devices.
Interfaces
Audio Input
AUX (3.5mm)
Max 1V RMS input
Optical
USB
for PC connection (16bit/44.1kHz)
and ACPWorkbench tuning
Bluetooth 5.0
AAC, SBC
Audio Output
L & R speaker socket
Subwoofer Speaker socket
Network
WiFi
2.4G
LAN
RJ45
Speaker Power
Stereo
L&R 50W@4Ω + Sub 100W@2Ω BT
L load at 24V
L&R 30W@8Ω + Sub 75W@4Ω BT
L load at 24V
L&R 22W@4Ω + Sub 48W@4Ω BT
L load at 19V
L&R 15W@8Ω + Sub 30W@4Ω BT
L load at 15V
Audio Performance
Signal Noise Ratio
≥85dB @ max
THD+N
<0.9% @ 1KHz, 1W
Crosstalk
>55dB @1KHz
Expansion Pins
LED
for connection to external LED status lights
KEY
for connection to external button board
IR
for connection to external IR receiver
General
Power Supply
12 - 24V DC adaptor
Knob
Volume, Tone, Bass
Size
149x134x59mm
Weight
0.5kg
