5
4
Front Panel
Rear Panel
• IEC 3 pin
AC connector and integral fuseholder
. Replace fuse with correct
value only: 100 - 120 V
AC 1 amp, 220-240 V
AC 0.5 amp. Please also refer
to volt
age details on Page 2
XLR Input connectors.
Balanced Input
connector wired Pin 1 Ground, Pin 2+ (Hot), Pin 3 – (Cold)
• Channel
A
Level control, variable from infinity to +6dB
• Channel B
Level control, variable from infinity to +6dB
• Channel
A
and B
switches and st
atus LEDs
• 12 x S
tereo Output
switches and st
atus LEDs
• 12 x Numbered Marker Panels.
A
‘scribble-strip’
for writing
down channel assigns
• Jack Output Connectors.
24 (2 per channel) ¼”
TRS (T
ipRingSleeve)
balanced output jacks. Wired
T
ip +, Ring –, Sleeve Ground
•
Channel
A
and B
Input Jacks with associated Loop Outputs for connecting
to other equipment or another
i-switch