Graphic Equalizer
Owner's Manual v 3.0 CE ©20103 ARX®
Graphic Equalizer
Owner's Manual v 3.0 CE ©2010 ARX®
4
5
Front Panel Controls
1. 15 (EQ215) or 30 (EQ260, 130) 60mm Extended Resolution long
throw, centre grounding sliders per channel, on standard ISO
frequencies
2. Clip LED indicates onset of clipping, monitored at all vital stages
throughout the EQ circuitry
3. Input Gain control, from infinity through 0dB to +6dB
4. 20 Hz to 200 Hz sweepable
5. High Pass Filter switch and LED
5. 15 dB/6 dB EQ range switch and LED
6. Hardwire Equalizer IN/OUT bypass switch and LED
7. Power LED indicates Equalizer is connected to AC power
EQ130 is electronically identical to a single channel of the EQ 260
Rear Panel Connectors
• Balanced Input TRS socket Channel A. Tip +HOT, Ring – COLD, Sleeve GROUND
• Balanced Input XLR type Channel A. Pin 2 +HOT, Pin 3 – COLD, Pin 1 GROUND
• Balanced Output XLR type Channel A (same wiring as Input)
• Balanced Output TRS socket Channel A (same wiring as Input)
• Audio Ground Lift switch
• IEC 3 pin AC connector and integral fuseholder. Replace fuse with correct value
only: 100 - 120 V AC 1 amp, 220-240 V AC 0.5 amp. Please also refer to voltage
details on Page 2
Channel B connectors identical to Channel A on EQ260 and EQ215
