Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX®
Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX®
4
5
Rear Panel Connectors
• Balanced Input TRS socket Channel A.
Tip HOT, Ring COLD,-Sleeve GROUND
• Balanced Input XLR type Channel A.
Pin 2 HOT, Pin 3 COLD, Pin 1 GROUND
• Balanced Output XLR type Channel A
(same wiring as Input)
• Balanced Output TRS socket Channel A
(same wiring as Input)
• Audio Ground Lift switch
Channel B connectors identical to Channel A
• IEC 3 pin AC connector and integral
fuseholder. Replace fuse with correct
value only: 100 - 120 V AC 1 amp, 220-240
V AC 0.5 amp. Please also refer to voltage
details on Page 2
Front Panel Controls
1. 15 or 30 maximum throw, well
damped, centre grounding sliders per
channel, on standard ISO frequencies
2. Clip LED indicates onset of clipping,
monitored at all vital stages throughout
the EQ circuitry
3. Input Gain control, from infinity
through 0dB to +6dB
4. 15 dB/6 dB EQ range switch
5. 30 Hz High Pass Filter IN/OUT switch
6. Equalizer IN/OUT switch
7. Power LED indicates Equalizer is
connected to AC power