Arx Valdex BUC3261, Руководство по оборудованию

Страница: 7 / 9

7
Step 4 (depend on card reader)
A "Removable Device" icon will appear on the task bar when the installation is completed.
Linux
System Requirement:
1. kernel versions 2.2.7 and later contain the USB code.
Install Card Reader step by step:
1. configure USB into kernel. Use of "make menuconfig" is recommended. Under "USB
support", you need to select "Support for USB". You also need to select either UHCI (Intel
PIIX4, VIA, ...) support, UHCI Alternate Driver (JE) support or OHCI-HCD (Compaq,
iMacs, OPTi, SiS, ALi, ...) support. Which one you select is dependent on what kind of
motherboard or adapter you have.
2. select "USB Mass Storage support"
3. select "Preliminary USB Device Filesystem"
4. select "SCSI support"
5. selct "SCSI disk support"
6. select "/proc support"