36
| Uplink Module and Stacking
Aruba S3500 Series Wired Access Point
| Installation Guide
10GBASE-X Port LEDs
Each uplink module port has two LEDs. These LEDs are used to monitor the status and activity on each
port. Depending the LED mode selected through the LCD panel, the displayed information will be different.
For more information on the LCD panel, see
“LCD Panel” on page 12
.
SFP and SFP+ Modules
SFP Modules, also known as mini-GBICs, are hot-swappable Gigabit Ethernet transceivers that provide
optical or copper connections to other devices.
Table 21
SFP/SFP+ 10GBASE-X Port LEDs
LED
Function
LCD Mode
Indicator
Status
LINK/ACT
Link status
N/A
Green (Solid)
A 10G link has been
established
Green (Blinking)
A 1G link has been
established
Off
No link
Status
Port status
Administrative
Green (Solid)
Port Enabled
Off
Port Administratively
Disabled
Duplex
Green (Solid)
Full-duplex
Off
Half-duplex
Speed
Green (Solid)
10 Gbps
Off
1 Gbps or below
Off
Speed mismatched
PoE
Off
N/A
Aruba tests and supports Aruba approved optics within their mobility access switch systems. Non-approved, third
party optics are not tested or supported; therefore, Aruba does not guarantee proper functionality of non-approved,
third party optics when used in an Aruba system. For a complete list of Aruba approved optics, contact your Aruba
sales representative.
Table 22
Supported SFPs
SFP
Description
SFP-SX
Aruba SFP, 1000BASE-SX, LC Connector
SFP-LX
Aruba SFP, 1000BASE-LX, LC Connector
SFP-TX
Aruba SFP, 1000BASE-T, RJ-45 Connector
