Aruba MSR4K43N0, Руководство по установке, Страница: 30 / 43

MSR4000 Installation Guide 29
4.2 Installing the MSR4000 on a Wall
Step 1 Mark the screw points.
1) Put the mounting bracket on the installation position against the wall.
2) Mark four expansion screw holes on the wall.
Figure 4-8 Position of Screw Holes
Step 2 Drill holes
1) Use a percussion drill to drill four holes on the four markings. (Expansion screw size: M8 x
100mm)
Step 3 Install masonry anchors
1) Insert a masonry anchor into each drilled hole vertically.
2) Tap the flat end of the anchor with a rubber hammer until the anchor is flush with the wall
surface.
Step 4 Fix the wall-mounting bracket
1) Align the four holes in the wall-mounting bracket with the anchors and insert four
expansion screws through the installation holes into the anchors.
2) Adjust the position of the wall-mounting bracket and tighten the expansion screws.
Step 5 Hang the MSR4000 on the bracket
1) Screw the two M4 x16 bolts into the holes on the back of the MSR4000.
2) Align the two M4 x16 bolts on the back of MSR4000 with the holes on the mounting
bracket and hang the MSR4000 on the bracket.