Aruba LS-BT1-MNT-50, Руководство по установке, Страница: 2 / 4

2 Aruba LS-BT1-MNT-50
| Installation Guide
2. Remove the protective film on the adhesive, attach the mounting bracket on the surface in the
upright position, as shown in Figure 2 .
Figure 2
Removing the Protective Film
3. Align the keyhole slots on the device with the projections on the mounting bracket, as shown in
Figure 3 .
Figure 3
Aligning the Device with the Bracket
4. Slide the device down until the clip of the mounting bracket snaps onto the top of the device, as
shown in Figure 4 .
Figure 4
Attaching the Device on the Mounting Bracket
Ensure that the device is activated before attaching it on the mounting bracket.