Installation Overview |
19
1
Global Status LED
When the switch is powered on, the behavior of the LEDs is as follows:
n
The
Global Status
LED remains on.
3. Remove power to the switch before mounting.
3. Mount the Switch
Unplug the AC or DC power from the switch before mounting it.
The switch can be mounted in these ways:
n
in a rack or cabinet
n
on a wall
n
under a table
n
on a horizontal surface
n
All Aruba Instant On 1430 Switches support table-top mounting.
n
All Aruba Instant On 1430 Switches support rack-mounting except R8R44A and R8R45A.
n
All Aruba Instant On 1430 Switches support wall-mounting with ports facing either up or down.
n
All Aruba Instant On 1430 Switches support under-table mounting.
o
R8R44A, R8R45A, and R8R46A must be mounted upsided down using the base surface mounting
holes.
o
R8R47A, R8R48A, R8R49A, and R8R50A must be mounted top surface up using the brackets
provided.
l
To prevent possible impact to long-term reliability, product should not be mounted upside-down.
Use only Aruba-supported transceivers.
Rack or Cabinet Mounting
All switches, except the Aruba Instant On 1430 5G Switch (R8R44A) and Aruba Instant On 1430 8G Switch
(R8R45A), can be mounted in a rack. The switches are designed to be mounted in any EIA-standard 19-inch
Telco rack or communication equipment cabinet.
