User’s manual – AWS-100
11
For more security setting, click on the Configure encryption icon, and the Encryption page will
show as below
9.
WEP
- For more secure data transmission, set the “WEP” to “WEP_128” or “WEP_64” to
ensure wireless network security. The advanced Wired Equivalent Privacy (WEP) is
implemented in this device to prevent unauthorized access. The 128 bits setting gives a
higher level of security but the setting must be the same as other clients in your wireless
network. (Default: Disabled)
10.
Key Entry
–This field can be set to “Passphrase” or “Manual Entry”.
Select the “Passphrase” means the KEY ID value will be auto generated by the internal
algorithm according the string defined in Passphrase field.
Select the “Manual Entry” means the KEY ID values allow/need user key in by manually.
(2 characters of hex in each block)
11.
Pass Phrase
- The security key for WEP encryption is generated from your pass phrase
so it should be the same as all the other stations in your network
64-Bit Manual Entry:
12.
Key 1~4 -
Key ID value, each Key ID contains 10 hex digits. Wireless devices can
communicate to each other depend on this Key ID element values are exactly the same
13.
Default Key ID -
Choose which Key ID value would be using to encrypt the data, the
value could be choose from 1 to 4.
128-Bit Manual Entry:
14.
Key 1 -
Key ID value, each Key ID contains 26 hex digits. Wireless devices can
communicate to each other depend on this Key ID element values are exactly the same
