28
| AP-85 Series Installation
Aruba AP-85 Outdoor Access Point Series
| Installation Guide
Figure 19
Positioning the AP-85 on a Horizontal Pole
Connecting Required Cables
RJ-45 CAT 5 Cable
To weatherproof and connect an RJ-45 terminated CAT 5E or better cable to an AP-85 (see
Figure 20
), perform the following
using the contents in the included kit that ships with your unit:
1. Slide the cap over the terminated cable.
2. Slide the rubber grommet over the terminated cable.
3. Slide the connector shell over the terminated cable.
4. Slide the washer over the terminated cable.
5. Insert the rubber grommet into the top of the connector shell until the top surface of the grommet is flush with the top
edge of the connector shell.
6. Connect the terminated cable to the proper port: LAN/POE port on the AP-85TX model or the CONSOLE port on the AP-
85FX/LX models.
7. Screw the connector shell onto the interface on the AP-85.
8. Screw the cap onto the connector shell.
N O T E
Before connecting other cables, first connect the ground stud to ground reference. See
Figure 20
for
the location of the ground stud.
N O T E
The cable is not included and must be purchased separately. Purchase a suitable UV-resistant,
outdoor rated, CAT 5E or better RJ-45 cable for use with the AP-85.
arun_0131D
Содержание AP-85
Страница 1: ...Aruba AP 85 Outdoor Access Point Series Installation Guide...
Страница 20: ...20 Outdoor Planning and Deployment Considerations Aruba AP 85 Outdoor Access Point Series Installation Guide...
Страница 42: ...42 Understanding Antennas Aruba AP 85 Outdoor Access Point Series Installation Guide...