Aruba AP 70
11
Installation Guide
AP Installation
Chapter 2
Using the Built-In Mounting Slots
The keyhole-shaped slots on the back of the Aruba AP 70 can be used to attach
the device upright to an indoor wall or shelf.
To hang the Aruba AP 70 upright using the mounting slots, perform the following
steps.
1.
Install two screws in the wall or shelf as shown in
Figure 2-2
:
F
IGURE
2-2
Mounting Screw Specifications
If attaching the device to drywall, we recommend using appropriate wall
anchors (not included) as shown in
Figure 2-3
on
page 12
.
C
AUTION
:
Do not use the mounting slots to hang the Aruba AP 70
from the ceiling, sideways, or in any place where it could
fall on people or equipment. For more secure installation,
use one of the optional mounting kits.
Screw/Nail Positions
(fastened to wall or shelf)
10 cm
(3 15/16")
3/32"
7/32"
3/16"
3/32"
clearance
from surface
2.4
mm
4.8
mm
1/16"
5/32"
clearance
from surface
1.6
mm
4.0
mm
clearance
from surface
2.4
mm
clearnace
from surface
5.6
mm
Maximum
Minimum
Screw/Nail Dimensions
