Installing the switch
|
37
Figure 1
Installing a fan tray
Power-on the switch and check LEDs
Prerequisites
The Aruba 8360 switch does not contain a power on/off switch. It is turned on by connecting the AC power
cord to the switch and an AC power source.
Check LEDs for proper switch operation. For further detail see
Checking the Switch LEDs on page 56
Power off the switch
Prerequisites
Remove the power cord from the switch and from the power source.
Mount the Switch
The supported mounting options for the Aruba 8360 switch include:
Aruba X412 1U Universal 2-Post RM Kit (JL704C/JL705C)
Brackets mount in three positions:
n
Front position (switch extends 432 millimeters behind rack post)
n
Center-of-Gravity (switch protrudes 196 millimeters from the front of the rack post and 243 millimeters
behind the rack post)
