Aruba 8360 12C, Руководство по установке и началу работы

Страница: 9 / 70

Label Description
10 LED Mode Select Button
11 USB-C Serial Console Port
12 QSFP28 port indicator LEDs
13 QSFP28 ports
3
14 Top (left) and Bottom (right) SFP28 port indicator LEDs
1
For SFP28/QSFP+/QSFP28 operation, only Aruba supported Transceivers or DACs are allowed.
For SFP/SFP+ operation, there is an Unsupported Transceiver mode available, however no warranty or support are
provided for the transceiver/cable when used.
2
Usr2 is reserved for future use.
3
For SFP28/QSFP+/QSFP28 operation, only Aruba supported Transceivers or DACs are allowed.
For SFP/SFP+ operation, there is an Unsupported Transceiver mode available, however no warranty or support are
provided for the transceiver/cable when used.
Network ports
Table 3: Network ports
Switch Model name SFP28 ports QSFP28 ports 10G Base-t ports MACsec ports
JL700A/JL701A Aruba 8360
32Y4C
32
1
4 0 4
2
JL702A/JL703A Aruba 8360
16Y2C
16 2 0 0
JL706A/JL707A Aruba 8360
48XT4C
0 4
3
48 0
JL708A/JL709A Aruba 8360
12C
0 12 0 0
JL710A/JL711A Aruba 8360
24XF2C
24 (SFP+) 2 0 0
1
Ports 1-4 are 10G/25G only and are in an interface-group. See Interface group operation
2
MACsec ports are ports 1-4.
3
QSFP28 ports cannot be split.
NOTE: For supported transceivers, see the latest version of the ArubaOS-Switch and ArubaOS-CX
Transceiver Guide.
Split mode (QSFP28)
QSFP ports on the Aruba 8360 switch series are capable of operating as:
• 100G ports
• 40G ports
• Split into 4 individual 25G or 10G ports
Chapter 2 Introducing the switches 9