CAUTION: The Aruba 8360 switch is not compatible with fan trays from other Aruba hardware
platforms.
Fan tray status LED
Table 13: Fan tray LED behavior
Fan tray LED
Function
State
Meaning
Status LED
To display fan tray status. ON green
The fan tray is operating
normally
FLASH amber (OS-CX)
The fan tray has been
disabled by the system
due to insertion of an
illegal fan tray or other
fault.
All fault events that occur in OS-CX will correspond to a warning available in the Event Log.
Use the
show environment fan
command for fan tray status information. (See the Fundamentals Guide for
your switch.)
Switch features
The features of the 8360 switches include:
• Combinations of QSFP28, SFP28, SFP+ and 10GBase-T ports.
◦
For a secure environment, all ports are disabled by default.
• Dual power supplies: Adding a second power supply provides redundant system power. If one of the
power supplies fails, the second power supply continues to provide the power necessary to keep the
switch running.
• Easy management of the switch through several available interfaces:
◦
Command line interface: A full featured, easy to use, VT-100 terminal interface for out-of-band
switch management.
◦
Web browser interface: An easy to use built-in graphical interface that can be accessed from
common web browsers.
• Support for up to 4094 IEEE 802.1Q-compliant VLANs so you can divide the attached end nodes into
logical groupings that fit your business needs.
• Support for many advanced features to enhance network performance: For a description, see the OS-CX
guides for your switch.
• Ability to update the switch software. To download product updates, go to the Aruba Support Portal.
22
Aruba 8360 Switch Series Installation and Getting Started
Guide
