2
Aruba 303P Series Campus Access Points
| Installation Guide
LED
The 303P Series access points have two LEDs that indicate the system and radio status of the device. These two
LEDs can be configured via ArubaOS or Aruba Instant software into three separate modes:
Normal mode (by default): See
Table 1
Both LEDs off
Blink mode: Both LEDs blink green (synchronized)
1 blinking: one second on, one second off, 2 seconds cycle
2 flashing: mostly on, fraction of a second off, 2 second cycle
3 alternating: one second each color, 2 second cycle
Table 1
303P Series Access Point LEDs Status in Normal Mode
LED
Color/State
Meaning
System Status
Off
Device powered off
Green- Blinking
1
Device booting, not ready for use
Green- Solid
Device ready for use, no restrictions
Green- Flashing
2
Device ready for use, uplink negotiated in sub optimal speed
(<1Gbps)
Red- Solid
System error condition - immediate action required
Radio Status
Off
Device powered off, or both radios disabled
Green- Solid
Both radios enabled in access mode
Green- Blinking
One radio enabled in access mode, other disabled
Amber- Solid
Both radios enabled in monitor mode
Amber- Blinking
One radio enabled in monitor mode, other disabled
Alternating
3
Green: one radio in access mode
Amber: one radio in monitor mode
