2
AP-90 Series Mounting Kit
| Installation Guide
Figure 2
Attaching the AP to the Mounting Bracket
Figure 3
Completed Installation
Using the Ceiling Rail Adapter
The AP-90 Series’ enclosure provides integrated mounting tabs that are designed to snap onto a
standard, non-recessed 15/16-inch (1.4 cm) ceiling tile rail; the optional mounting kit is not required for
this installation. The mounting kit includes adapters that allow you to mount the AP-90 Series unit on a
recessed or non-recessed standard 9/16-inch (1.4 cm) rail or on a recessed standard 15/16-inch (1.4 cm)
rail
To attach either ceiling rail adapter to the AP-90 Series AP:
1. Place the adapter against the back of the AP with the adapter at an angle of approximately 30
degrees to the tabs (see
Figure 4
).
2. Twist the adapter clockwise until it snaps into place in the tabs (see
Figure 4
).
AP-90_002
AP-90_003
