Aruba Networks AirOS v2.3, Руководство пользователя

Страница: 62 / 254

52 Aruba AirOS Part 0500036-02
v2.3 User Guide January 2005
2 User derivation rules: The administrator can configure these rules to match a
user characteristic in different ways to values to derive a role for the user. The
various user characteristics that can be used to derive a user role are:
z
BSSID of the Access Point that client is associated to.
z
Encryption type used by the client.
z
ESSID that the client is associated to.
z
Location of the Access Point that the client is associated to.
z
MAC address of the client.
As an example, the administrator can configure a rule to assign the role “VoIP-Phone” to
any client that has a MAC address that starts with bytes xx:yy:zz.
3 Default role for an authentication method: Every authentication method can be
derived with a default role for users that are successfully authenticated using
that method. Refer to the guides to configure each of the authentication method
(802.1x, VPN, Captive Portal) for more details on how to configure the default
role for each authentication method.
As an example, the administrator can configure the default role of all users authenticated
using 802.1x as
“employee” .
Configuring Policies
This section describes the steps to configure the rules that constitute a policy. This policy can
then be applied to a user role (until the policy is applied to a user role, it does not have any
effect).
Creating a New Policy
To create a new policy:
1 Navigate to the
Configuration > Security > Policies
page on the WebUI.