Avoid the following:
-
Touching the appliance with wet parts of the body;
-
Using the appliance when barefoot;
-
Pulling on the appliance or the supply cord to unplug it from the electrical outlet;
-
Obstructing the ventilation or heat dissipation slots;
-
Allowing power supply cords for small appliances to come into contact with the hot parts of the
appliance;
-
Exposing the appliance to atmospheric agents (rain, sun);
-
Using the oven for storage purposes;
-
Using flammable liquids near the appliance;
-
Using adaptors, multiple sockets and/or extension cords;
-
Attempting to install or repair the appliance without the assistance of qualified personnel.
WARNING- Accessible parts will become hot when in use. To avoid burns and scalds
children should be kept away
During use the appliance becomes hot, Care should be taken to avoid touching heating elements inside
the oven.
Qualified personnel must be contacted in the following cases:
-
Installation (following the manufacture’s instructions);
-
When in doubt about operating the appliance;
-
Replacing the electrical outlet when it is not compatible with the plug for the appliance.
Service Centres authorized by the manufacturer must be contacted in the following cases:
-
If in doubt about the soundness of the appliance after removing it from the packaging;
-
If the power supply cord has been damaged or needs to be replaced;
-
If the appliance breaks down or functions poorly; ask for original spare parts.
It is a good idea to do the following:
-
Only use the appliance to cook food, nothing else;
-
Check the soundness of the appliance after it has been unpacked;
-
Disconnect the appliance from the electrical mains if it is not functioning properly and before
cleaning or performing maintenance;
-
When the appliance is not used for an extended period of time, cut off the supply of power and
close the gas cock (it present);
-
Use cooking gloves to place cookware in the oven or when removing it;
-
Always grasp the oven door in the centre because the ends may be hot due to the escape of hot air;
-
Make sure that the control knobs are on the
“
o
”
setting when the appliance is not in use;
-
Cut the power supply chord after disconnecting it from the mains when you decide not to use the
appliance any longer.
◎
The manufacturer may not be held responsible for any damage due to: incorrect installation, improper,
incorrect and irrational use.
Installation
Important: the power supply to the appliance must be cut off before any adjustments or maintenance work is
done on it.
Installation of Built-in Ovens
To ensure the proper working order of the built-in appliance, the kitchen unit must be of a suitable size.
