Artusi AINT119/NF2, Руководство по эксплуатации

Страница: 20 / 28

Instruction Manual | 19
Fig.11
Cover caps
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been
reversed. With the door closed, use a hair dryer to expand the seal
and fill the gap between the door and the body of the appliance.
Take care not to use the hair dryer too close to the appliance, which
could damage the seal. A distance of approximately 10cm should be
adequate. When completed, allow the seal and door to cool before
touching them. Once done, the seal will remain in position.
Reversing the cebox door
Remove the lower hinge piece (circled in Fig. 11) by removing the
two screws holding it in place. The door will begin to drop once
this has been removed so take care. Place the door somewhere
safe and remove the lower
hinge piece. Carefully take
out the white cover caps from
the opposite side.
Place these in the old hinge
position holes. Remove the
door latch strike plate (Fig. 12)
and mirror its position on the
opposite side. Re-fit the door
in the new position, ensuring that
the upper hinge pivot on the
door goes into the recess in the
top of the fridge. Latch the
door over the strike plate and
fit the lower hinge piece
in its new position. Test that the
icebox door functions properly
and make any necessary
adjustments.
Fig.12