11
Standard daily cycle for
normally soiled loads, such
as pots, plates, glasses.
A shorter wash for lightly
soiled loads and quick wash
Normal
Rapid
Pre-wash
Wash
（
55
℃）
Rinse
（
65
℃）
Drying
Wash
（
45
℃）
Rinse
（
45
℃）
5/20 g.
15 g.
160
30
10
0.78
0.4
For heaviest soiled crockery,
and commonly soiled pots,
pans, dishes etc with dried
on soiling;
Pre-wash
（
50
℃）
Pre-wash
Wash
（
65
℃）
Rinse
Rinse
Rinse
（
55
℃）
Drying
1.2
18
5/20g
13
120
For commonly soiled loads,
Use multifunctional detergent
pre-wash
Wash(50
℃
)
Rinse(65 )
Drying
℃
3in1
155
0.85
12
(AS/NZS 2007. 1 )
If some of the program lights begin to glimmer, that indicates the machine is out of order, turn off
the main power and water supply before calling a service(see the section entitled "Error codes").
A forgotten dish can be added at any time before the detergent cup opens.
Open the door a little to stop the washing.
After the spray arms stop working, you can open
the door completely.
Load the forgotten dishes.
Close the door, the dishwasher will start running again
after 10 seconds.
4
3
2
1
NOTE:
It is dangerous to open the door when washing, because the hot water may scald you.
Starting a wash cycle
1 . Draw out the lower and upper basket, load the dishes and push them back. It is commended that loading the lower basket
first, than the upper one (see the section entitled Loading the Dishwasher.)
2. Pour in the detergent (see the section entitled Detergent and Rinse Aid)
3. Insert the plug into the socket. The power supply is 240VAC 50 Hz, the specification of the socket is 10 A 250 VAC.
4. Make sure that the water supply is turned on to full pressure.
5. Open the door, press the Power button, then press the your desired program. (Seethe section entitled."Wash Cycle Table".)
6. With a little force to ensure the door is properly closed.
NOTE: A click could be heard when the door is closed perfectly.
7. When the working cycle has finished , turn off the power and water supply.
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent
dispenser must be refilled (see the section entitled " Loading the Detergent " ).
Open the door, Press the prog. Button more than three seconds to cancel the program , then you can change the
program to the desired cycle setting (see the section entitled " Starting a wash cycle " ). Then , close the door.
NOTE:
If you open the door while washing, the machine will pause, when you close the door, it will keep on working after 10 seconds.
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Содержание ADWFI458
Страница 1: ...ADWFI458...
