CST. CO., LTD.
15
5.1.2. How to change the setup of arm location using hand controller
<Fig 5.1.1> <Fig 5.1.2> <Fig 5.1.3>
Step 1. At the stop mode <Fig 5.1.1>, the display is changed to <Fig 5.1.2> when
it touched the symbol [M] (Present exercise arm is right.).
Step 2. Touch [R] display area
that ‘R’ means present setup status being right arm
at the <Fig 5.1.2
> and change ‘R’(Right arm) to ‘L’(Left arm) using
[Up/Down]
arrow.
Step 3. And then, touch the symbol [M] to complete setting of arm changing,
Then setup arm display on the top of [
Speed/Uniform/Acceleration] display
Area.
Warning : In order to prevent injuries, it should be adjust the present angle of
elbow motor to 90° and the present angle of wrist to -90° using Hand
Controller before mechanical arm location changing.
Warning : In order to prevent serious injuries, it should be changed the setting
data of exercising arm with controller after mechanical arm location
changing.