Artus 703S, Руководство пользователя, Страница: 26 / 30

CST. CO., LTD.
25
● Pressing and holding the [Up arrow] increase current angle, if it is reached at
desired angle, touch [Upper limit] display area(1) to set as [Upper limit] angle.
The <Fig 5.2.5> shows the setting being changed from 110° to 130°.
● Pressing and holding the [Down arrow] decrease current angle, if it is reached at
desired angle, touch [Lower limit] display area(3) to set as [Lower limit] angle.
The <Fig 5.2.6> shows the setting being changed from 50° to 30°.
5.2.7 Locking the touch function
●
It is possible to lock the touch function in order not to change a programmed value by
patient.
● Pressing and holding the [STOP] button for 5 seconds in the stop mode, the [Lock]
function is set with ‘beep’ sound and symbol displaying, above screen shows this.
●
It is available to operate only [START] and [STOP] button.
●
The [Lock] function is disabled
with ‘beep’ sound and symbol di
sappear
ing
by pressing
and holding
the [STOP] button for 5
s
econds
.