PWR05
9. Charging status button
Press this button to check the load status.
10. Status LEDs
While charging, the status LEDs will blink one
after the other. As soon as the device is fully
charged, all LEDs will be permanently lit.
11. USB port.
Connect an external USB device (5V,2A) to this
port in order to charge your device.
NOTE: this USB port is intended for charging
only. In order to charge an external device, the
device has to be turned on.
12. Aux Input.
It is possible to connect an external playback
device (e.g. CD player) via 3.5mm jack to the
AUX input, if the PWR05 is already turned on
while connecting an external playback device, a
voice will say” audio mode on”.
NOTE: In AUX mode, it is not possible to link
two PWR05.
ׁ
Warning: Make sure speaker is off and all
LEVEL controls are down (counterclockwise)
before every use.
Connections:
1. For this unit you can connect a mixer, micro-
phone or CD player directly into your PWR05,
to connect a device use 3.5mm Jack connector
to connect to the AUX (12) input.
2. Turn on your mixer/microphones or other sig-
nal source, then turn on your unit, the Bluetooth
indicator (4) will be lit, and will have Voice
prompts, now you can adjust volume controls
to a reasonable level.
Technical specifications
• 3-way system with active filter
• woofer : 6” paper cone
• midrange : 2 x 3” paper cone
• tweeter : 1” silk cone
• bass reflex
• amplifier power RMS : class D, 75 W
• amplifier power max : class D, 150 W
• frequency range : 60 Hz-20 kHz
• aux-input : 3.5 mm jack
• sources :
- stereo Bluetooth/TWS
- USB (charging) (Type A), 5V/2A
• wireless : Bluetooth 4.2
• battery with LED-indication : 6600 mA (10 hours)
• weight/piece : 4.4 kg
• casing : ABS-plastic
• colour : black
• measurements (hxwxd) : 430 x 180 x 180 mm
• accessories : carry strap
K
www.artsound.be
E
Artsound.audio
Q
artsoundaudio
House of Music nv
Ronse, Belgium
¼
+32 9 380 81 80
º
Warranty conditions
2 year warranty from the date of manufacture.
The warranty is limited to the repair of replacement
of the detective material insofar as this defect is a
resu Il of normal use and the device has not been
damaged. Artsound is not responsible lor any other
casts that ensue as a result of the defect (e.g. trans-
port). For details, please consult our general terms
and conditions of sale.