WARRANTY CONDITIONS
2 year warranty from the date of manufacture.
The warranty is limited to the repair of replacement of the detective material
insofar as this defect is a resu Il of normal use and the device has not been
damaged. Artsound is not responsible lor any other casts that ensue as a result
of the defect (e.g. transport). For details, please consult our general terms and
conditions of sale.
Waste electrical products should not be disposed of with household
waste. All electronic products with the WEEE logo must be collected
and sent to approved operators for safe disposal or recycling. Please recycle
where facilities exist. Many electrical/electronic equipment retailers facilitate
"Distributor Take-Back scheme" of household WEEE. Check with your Local Au-
thority or retailers for Designated Collection Facilities (DCF) where consumers
may dispose of their WEEE free of charge.”
3. Television Enhancement
Many newer television sets are equipped with variable Stereo outputs. The sig-
nal available at these outputs varies with the television volume. In this situation,
these variable audio outputs can be connected directly to the Subwoofer line
inputs to enhance the bass response of the television's built-in speakers.
4. Dedicated Subwoofer Connections
Many surround sound decoders, home theater processors and audio/video
receivers are equipped with a dedicated subwoofer line output. In this case,
the signal is already processed and does not need to return to the system or
other speakers. Connect this line output to the line inputs of the Subwoofer. A
Y connector should be used to feed this single output to both the left and the
right line inputs.
TECHNICAL SPECIFICATIONS
• range : <75 m
2
• system : active subwoofer
• woofer : 8”polymica
• bass reflex
• impedance : 4 / 8 Ω
• amp power : 200 W
• frequency range : 40 Hz - 180 Hz
• phase control
• high-level inputs
• dimensions (h x w x d) : 325 x 310 x 350 mm
• 10kg / piece
• composition : MDF
SETTING AND REGULATION
Once you have selected the location for your subwoofer and connected it to
your system, settle into your normal listening position. Start with the crossover
button in the middle and adjust the gain button so that the volume being played
is balanced with the volume played by your speakers. Then adjust the crosso-
ver and gain together according to your hearing and the specifications of your
speakers. Repeat this until you get a desired sound.
CONNECTING THE SUBWOOFER
Hi Level In
These inputs are designed to accept an amplified signal from the speaker out-
puts of a receiver, power amp or other device not equipped with line level out-
puts.
Hi Level Out
The original amplified signal from your source is present at these outputs, for
connection to the existing left and right speakers.
Line In
The RCA-type jack of your Subwoofer is designed to accept a line level signal
from a receiver, pre-amp, surround sound decoder, television or similar device.
When using a single line level output from another unit, a Y connector should be
used to send the signal to both the left and right inputs.
The following diagrams show four of the most common types of
subwoofer connections.
1. Hi Level Connections
Here the signal is already amplified as it leaves the receiver/amplifier. The
speaker terminals of this unit are connected to the hi level inputs of the Sub-
woofer.
The left and right speakers receive the original amplified signal from the Sub-
woofer hi level outputs.
2. Line Level Connections
In this example, the pre-amp outputs of a stereo receiver are connected to the
Subwoofer line inputs.
K
www.artsound.be
E
Artsound.audio
Q
artsoundaudio
House of Music nv
Ronse, Belgium
¼
+32 9 380 81 80
º
ASA80.2
