Artone U&I-03, Инструкция по эксплуатации

Страница: 3 / 18

Bluetooth LoopSet Instruction manual
Item no
: U& I - 03
There are few easy steps you should go through, that
will enable comfortable and easy communication with
your
Bluetooth LoopSet
. First you must charge the
Bluetooth LoopSet.
Initial charge takes about 3 hours (The procedure
described below under title:
Charging..
.)
The second stage is
pairing
your
Bluetooth LoopSet
with your Bluetooth compatible phone. (You can find
the instruction for pairing under the title:
Pairing
...)
*Get your phone user manual ready for instructions
regarding new device add/search.
The third and last stage is learning your
Bluetooth
LoopSet
functions and button usage.
(The instructions for this found under title:
Function
Statement
.)
N o t e :
In order to use the Artone Bluetooth LoopSet,
please make sure that your hearing aid (or
inductive receiver) is set to t-coil function. “T” or
“MT” - please refer to the hearing aid manual.
Make sure your phone is compatible with
Bluetooth technology.
After pairing, you can put the BT Loopset around
your neck and start using the device.