artograph Super Prism Скачать руководство пользователя страница 2

2

Important Safeguards

When using this projector, always follow basic
safety precautions, including the following:
1.  Read and understand all instructions 
 before 

operating.

2.  Close supervision is necessary when used  
 

by or near children. Do not leave unattended 

 

while in use.

3.  Do not operate this equipment with a damaged 
 

cord, or if it has been dropped or otherwise 

 

damaged, until it has been examined by a 

 qualifi 

ed 

electrician.

4.  If an extension cord is necessary, be sure it 
 

has a suitable current rating. Cords rated for 

 

less amperage than this equipment may 

 

overheat. Be careful to arrange the cord so that 

 

it will not be tripped over or pulled.

5.  Always unplug from the electrical outlet when 
 

not in use. Disconnect by grasping and pulling 

 

the plug from the outlet; never yank the cord to 

 

disconnect the plug.

6.  Allow the projector to cool completely before 
 

moving. Loop the cord loosely when storing.

7.  If the projector receives water damage, do not 
 

use until inspected by a qualifi ed electrician.

8.  To avoid electrical shock hazard, do not 
 

disassemble. Take the projector to a  qualifi ed 

 

electrician. Incorrect reassembly can cause an 

 

electrical shock hazard.

9.  Care must be taken as burns can occur from 
 

touching hot parts.

10.  The projector switch is provided with the 
 

symbols 0, indicating off, and I, indicating on.

11.  Position the cord so that it will not be 
 

tripped over, pulled or come in contact 

 

with hot surfaces.

12.  Always unplug the projector from electrical outlet 
 

before cleaning, servicing and when not in use.

13.  To reduce risk of electrical shock, do not 
 

immerse this projector in water or other liquids.

14.  The use of accessory attachment not 
 

recommended by the manufacturer may 

 

cause the risk of fi re, electric shock or 

 

injury to persons.

15.  Connect this projector to a grounded outlet.
16.  Disconnect the projector from power supply 
 

before replacing lamps.

Set up & Operation

Contents: 

Pro Prism Accessory  Lens + 
Super Prisim Lens 

The Super Prism both enlarges and 
reduces with one reversible lens

 

(See General 

Focusing & Enlarging section for reduction and 
enlargement positions.)

1.

 

Projection Area

All opaque projectors work like a fl ashlight; the 
darker the room, the brighter the projected image 
will appear. The clearest and brightest images are 
produced in a completely dark room. For best 
results, operate your Super Prism in a room where 
you are able to control the lighting conditions or work 
in the evening. To achieve the maximum image size 
of approximately 20X, a minimum distance of 18 
ft. (5.5m), measured from the label above the lens 
to the projection surface, is required (see Distance 
Chart for further information).

Mount the projector onto a surface that can be easily 
moved. Movement of the projector is required to 
achieve the desired size. A taboret or rolling cart is 
ideal. Artograph offers two optional Projector Floor 
Stands, that can be easily moved and raised for the 
ultimate in image positioning.

2.

 

Projecting

To load the projector, 
simply lift the copy board 
lid of the projector and 
mount your copy face 
down onto the glass 
surface. The metal copy 
clip may be pushed to the 
side if desired as it is only 
necessary when mounting 
the projector onto the accessory Prism Table Stand, 
item #225-206. Close the cover, plug the projector 
into an outlet and turn the projector on by fl ipping the 
switch at the back of the unit. Turn the room lights 
off. You are now ready to adjust the size and clarity 
of the projected image. Always adjust the desired 
size of the projected image fi rst before focusing it. 
(See Distance Chart for approximate distance.)

CAUTION: During operation, ensure the 
projector is properly ventilated. Do not block 
the exhaust or inlet vents located on the back 
and sides of the projector.

PLEASE SAVE THESE INSTRUCTIONS

Projector

 •

Super Prism Lens

 •

Prism Lens

 •

Содержание Super Prism





























Отзывы: