moody’s indicator LED flashes white to acknowledge it has entered
white level programming mode, then displays the white level of the
zone.
Step 3 - programme the white level
Programming of zone 1 is now complete. moody’s indicator
LED flashes
red
to acknowledge that it is ready to accept colour
programming for zone 2. Repeat steps
2
&
3
for each zone.
Step 4 - programme the other zones
moody displays the master level (100%) and colour of zone 1. It is
now in normal operating mode.
Step 6 (end)
When programming of all zones is complete, press and hold
the control for 3 seconds to exit programming mode. moody
acknowledges by flashing
green
.
Step 5 - exit programming mode
N.B. In moody z, the white level is really saturation - it controls
the amount of white that is mixed in with the colour and allows
shades to be created.
b)
Alternatively, rotate the control clockwise or counter-clockwise
to increase or decrease the white level. When you see the white
level you want, briefly press the control.
a)
Wait 5 seconds; moody will start slowly cycling through the white
levels. When you see the white level you want, briefly press the
control.
