artisan TORO 4000 Series, Инструкция и каталог запасных частей

Страница: 4 / 36

4.
1.
2.
Normal stitching operation causes dust, lint, and dirt to build up around the moving parts of your TORO-3000, 3200
and 4000. Periodically clean around all the moving parts of the machine. Pay special attention to keeping the shuttle,
shuttle race, and throat plate area clean.
Simply wipe off the build-up with a clean cloth or blow off the dirt with compressed air.
Lubricate these five points through the front inspection cover.
Your new
artisan
u
TORO-3000 and 4000 was thoroughly lubricated at our factory. However please re-lubricate the
machine before putting the new stitcher into service.
The TORO-3000 and 4000 requires lubrication at the above points on a regular basis. Artisan recommends that the machine
is oiled about every 7 to 12 hours of actual usage.
We suggest the best time to oil the machine is at the end of your work day. When you begin to use the machine the next time,
simply wipe off the excess oil and the dirt or lint at the same time.
If sewing for prolonged periods of time oil the machine about every 5 to 7 hours.
TORO-4000 P
4.