manualshive.com logo in svg

artisan MDR, Руководство пользователя

Поделиться
Скачать
artisan MDR Скачать руководство пользователя страница 12

1.2.2 

MDR-250

 

Five PMCs positions for more versatile I/O configurations.  This configuration is the 
preferred method for providing Ethernet connection to a host computer, because an 
additional VME SBC is not required to provide the network gateway. 
 

 

 
For further details, see 

Appendix E: MDR Standard Configurations

. 

1.3 Software Components 

MDR-HOST-SW

 

MDR host software contains MDR Shell and API for host 
workstation (Only one required per project). 

MDR-xx0

 

Base software run-time licenses included. 

1.4 Host System Requirements 

Host architectures: 

• 

Sun SparcStation with Solaris 2.6 (or higher) and Ethernet interface, 

• 

i386 (or higher) PC with Windows NT/2000 and Ethernet interface, 

• 

MIDAS with VxWorks 5.4, 

• 

Power PC SBC with VxWorks 5.3.1/5.4. 

1.5 Host Computer Software (SDK CD-ROM) 

The MDR can be connected to the host computer via the RS-232 port or via Ethernet 
(requires an Ethernet PMC on the MDR-250 base unit or VME SBC for network 
gateway). All the software needed to run the MDR system from any of the above hosts is 
contained in a CD-ROM.  The Host MDR Shell relies on the mdr.ini file.  The mdr.ini is 
located in the host/etc directory and must be modified with a text-only editor (i.e., 
Notepad) to set parameters such as the number of disks. 
 
For further details on the MDR Host software, see Section 4:

 MDR Host Software. 

MDR User Guide 

5 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание MDR




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды