Quick Start Guide
• 5
Step 2
Using the USB cable supplied with the
USB device, connect the USB device to
the wireless adaptor.
Step 3
Apply power to the wireless adaptor.
Step 1
Insert the host side wireless adaptor into a
USB port on the PC.
Step 4
Confirm the connection. The device
will show up and operate as if it were
connected using standard wired USB.
The ADP-RDK sample kit is designed to use the Wireless USB protocol to replicate the operation
of a USB cable. If this is the first time the USB device has been connected to the PC the normal
operating system mass storage installation messages should appear. If the device has previously
been connected it should appear as a device on the PC in the normal way.
You are now ready to start using your USB device with standard PC applications!
Quick Setup Instructions
Содержание ADP-RDK
Страница 1: ...Wireless USB Adaptor Reference Design Kit...