Artico SY-PA500, Руководство пользователя

Страница: 10 / 16

9
4. Sleep mode
Press the button to activate the sleep mode.
The Sleep indicator light and the fan speed light will turn on, while all
other indicator lights will turn off.
When you use the air purifier in sleep mode, it will operate very quietly.
Press any of the buttons to switch off the sleep mode except the Filter and
Timer buttons.
5.
Working status (Air quality light)
The air purifier integrates a sensor which measure the quality of the air. The
air quality light automatically goes on when the appliance is switched on.
After a few seconds, the air quality sensors will automatically display the
color of the LED light that corresponds to the ambient air quality. Below is
the chart to understand Air quality level.
AQ Color Blue Green Orange Red
AQ Level Very god Good Unhealthy Hazardous
Standby status (Night light mode):
1. When In standby mode, press the button to turn on the amber light
mode.
2. Press the button once more to decrease the light effect to half the
brightness.
3. To turn off the light, press the button for the third time.
6.
Setting the timer
1. Press to turn On or Off the timer function and to cycle through the
different timer options (2, 4, 8 Hours).
2. The air purifier will automatically power off once the timer has elapsed.
Note
: pressing the button or unplugging the air purifier will cancel the
timer
.
7.
Filter replacement indicator
When the filter indicator lights up, this means the filter needs to be checked.
The first option is to clean the filter. Take out the filter and clean it (do not wash).
Place the filter back in its compartment and check if the filter light is no longer on.