Artico SY PA300, Руководство пользователя

Страница: 13 / 16

12
6. Rotate the base cover clockwise from OPEN position to LOCK position, you will
hear a "click" sound, the
base cover is blocked. (f)
(f)
7. Connect the plug in the wall socket and switch
on the appliance again. (g)
(g)
8. Reset filters lifetime.
If after replacing the new filter, the indicator lights up, you
should reset the filter life.
1). Plug in the air purifier and turn it on.
2). Press and hold the button for 3 seconds. (h)
3). Release the button after 3 seconds and the light
will turn off. (h)
4). The reset is now complete.
Filter replacement force mode
When using the air purifier in an environment of heavy pollution, the lifespan of the
air filter may significantly reduce. You can change the filters even if does not
light up. Follow the steps below to perform a hard reset
.
1). Replace the air filters as mentioned in the Filter Replacement section (5).
2). Plug in the air purifier and let it be in standby mode.
3). Press and hold the button for 3 seconds. The indicator will light up.
4). Press and hold the button for 3 seconds again and the indicator will turn off.
The reset is now complete.