Press the Power button, the appliance enters into working condition, at that time, the power
indicator illuminates. To turn off the appliance, hold and press the Power button for about 2
seconds.
Steam toggle button
The steam rate can be selected low, medium or high by the steam toggle button. Any one to
be selected, its corresponding indicator will blink, and it will illuminate solidly after finish
preheating, which means that the steam is ready for use.The default setting is the low steam
rate when the appliance is turned on.
Shot of steam
Quickly press the steam trigger twice to produce shot of steam. An interval of at least 8
seconds must be maintained between two continuous cycles. The “Shot of steam” function
can be only activated under high steam rate.
Descaling indicator
If the descaling indicator illuminates, it indicates the steam generator shall be cleaned by
virtue of the mineral deposits collecting to a degree. And you shall perform descaling by
following the operation in Step 3-4 of
“CLEANING AND MAINTENANCE”
. After finish
descaling, restart the appliance and press the “Descale” button, then the descaling indicator
extinguishes, and the appliance can work normally again.
Automatic power off
After entering into the normal standby mode, the appliance will turn off automatically if no
operation within 10 minutes. To restart the appliance, just need to press the Power button
again.
Cord clip
When not in use, the steam supply hose and power cord can be stored at the cord clips.
Correct placement of iron on the thermal insulation stand
When the iron is put on the thermal insulation stand, it must be placed on it correctly. See the
Figures as below.