ARTHUR HOLM ERT 30, Руководство пользователя

Страница: 16 / 26

16
AHLINK
The first line shows the model name of the device.
SERIAL
Serial number of the unit.
VER
Firmware version.
ADDRESS
Set-up the AHnet address to send a command. Use
address 0 to broadcast the command instruction.
DYNAMIC2 CONTROL
Sends basic commands to Dynamic2 monitors
family. Select the AHnet address to send the
command, and press the function to send to AHnet
RS422 BUS.
DYNAMIC3 CONTROL
Sends basic commands to Dynamic3 monitors
family. Select the AHnet address to send the
command, and press the function to send to AHnet
RS422 BUS.
DYNAMICTALK CONTROL
Sends basic commands to DynamicTalk
microphones family. Select the AHnet address to
send the command, and press the function to send
to AHnet RS422 BUS.
IP ADDRESS
Shows the actual ERT IP address. Note that if the
DIP6 is active, the unit is configured with the factory
IP and this IP information should be different.
MASK
Shows the actual ERT MAK
address.
Configuration PSW
Enter the password 4006 to set-up the ERT IP
address. The next page shows the ERT network
configuration.
GATEWAY
Shows the actual ERT
gateway address.