11
POWER AND CONTROL
AHnet: RJ45 CAT5 connector for addressable RS422 control. There is a
loop through connector to use as signal RS422 output. You can connect
up to 30 devices on the same RS422 bus
Termination: Active (ON) the termination ONLY on the last devices of
the RS422 bus
ADDRESS: Configure the AHnet unit address on RS422 bus to individually
control the unit using RS422 AHnet protocol
SERVICE: Used for firmware upgrade
12V D.C.: Power supply input connector
CONTROLS
1.
OPEN/CLOSE button:
Press this button to open or to close the hatch.
Make sure that there are not objects or body parts that could obstruct
the movements.
