12
OPTION 3
-
Veneer thickness and machining must be the specified in the “Pattern Hole” document.
-
Veneer material can’t be metallic.
2. Clean the top surface of the metal monitor housing and the
bottom surface of the Veneer.
3. Glue the Veneer. Double-side tape or glue can be used
(depending on the kind of materials are going to be jointed).
The total thickness of the glue used can’t be thicker
than 5,25mm [0,2].
1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces
are touching each other in the whole length. If there is a gap between the Veneer and the monitor, check if the hole
depth in the Veneer is correct. To adjust them better the head of the cyllinder can be gently filed
The pressure applied
must not exceed 1 Kg
evenly distributed on
monitor surface.
Veneer Guide (Optional)
