13
INPUT CONNECTORS
DVI 1/DVI A: DVI-I input signal. Connect a DVI (digital) input signal and
select DVI 1 on the OSD monitor menu. Use a DVI to VGA adapter to
connect an ARGB (analogue) input signal and select DVI-A on the OSD
monitor menu
DVI 2: DVI-D input signal. Connect a DVI (digital) input signal and select
DVI 2 on the OSD monitor menu
12V D.C.: Power supply input connector
Use high quality HDMI cables with 2m maximum length
12V D.C.: Power supply input connector. XLR-4 connector:
1,2: Ground
3,4: 12Vdc
GPI: Monitor external contact close control. SubD9 female
1. GPI1 +
2. GPI1 –
3. GPI2 +
4. GPI2 –
5. GPI3 –
6. GPI3 +
7. N.C.
8. +12Vdc (600mA max.)
9. Ground
Use GPI1 (1:12Vdc, 2: Ground) to open the monitor
Use GPI3 (6:12Vdc, 5: Ground) to close the monitor
Termination: Active (ON) the termination ONLY on the last monitor of
the RS422 bus
AHnet: RJ45 CAT5 connector for addressable RS422 control. There is a
loop through connector to use as signal RS422 output. You can connect
up to 30 monitors on the same RS422 bus
SERVICE: Used for firmware upgrade
Below the monitor, so you have the
keyboard and mouse output cables
