29
AHLink
AHlink is used to control and set-up the unit.
By default, the AHLink wireless signal is deactivated. To activate it,
please press and hold the Open and Close buttons simultaneously on
the cover plate for 5 seconds.
You can also activate the AHlink signal with the LCD (Interactive
Setup Display) located under the monitor. Press the Down key
near the LCD (Interactive Setup Display), until the "<AHlink>
¨option appears. Press the OK button to activate the AHlink signal
on the unit. When the AHlink signal is activated, the sound of 5
beeps will indicate that the AHlink signal is active on the unit.
The wireless AHLink signal
automatically deactivates when there
is no device connected during more
than 2 minutes. When the AHLink
deactivates, you will hear a long Beep
sound.
To control and set up your AH product
with AHLink, please download it from
the App Store (IOS system) or from
Google Play (Android system) and
execute it in your handled device.
It is recommended on to select
Auto Connect and select Portrait on
Orientation. To connect it, select Scan
for local devices.
