Operation and Frequently Used Functions
1. Turn console power on.
3. Adjust settings:
a) Speed adjustment:
Use Up and Down buttons.
b) Oscillation modes:
Choice of 3 different OSC modes:
■
Standard (STD)
■
Efficient (EFF)
■
Aggressive (AGG)
■
The sterile suction tube set is connected with the suction connection of the shaver handpiece
■
Adjust the flow volume with the suction control
■
To insert a shaver blade or burr, fully insert the hub into the hub bore of the handpiece. Watch the locking
pin slide back and forth to check that it is locked in place; there will be an audible “click” sound when the
handpiece is securely locked
■
Use the RPM selection button on the front panel of the console, the selection mechanism on the hand-
piece, or the footswitch to adjust the speed of the handpiece
2. Connect shaver handpiece (the console will recog-
nize the handpiece type, and display available options
for the operator to adjust as desired).
■
Insert the handpiece connector into the handpiece
receptacle of the console so that the red dots on the
connector and receptacle align and engage easily
■
The shaver handpiece cable connects and locks to
the console to prevent accidental separation during
use. To avoid damage, only disconnect the shaver
handpiece by pulling on the cable connector
■
Connect footswitch
