Arthrex EJ-MLA26UA, Руководство по эксплуатации

Страница: 12 / 44

12
Location of Controls — Continued
a
DC IN terminal
Connects the DC cord.
b
VIDEO input terminal (BNC type)
Connects devices having VIDEO output terminals.
c
Y/G input terminal (BNC type)
Connects devices having Y for output component
(luminance), or devices having G for RGB component.
d
P
B
/B input terminal (BNC type)
Connects devices having P
B
/C
B
(blue differential) for
component output, or devices having B for RGB output.
e
P
R
/R input terminal (BNC type)
Connects devices having P
R
/C
R
(red differential) for
component output, or devices having R for RGB output.
f
SYNC input terminal (BNC type)
When the monitor is operated externally synchronized,
connects devices having C.SYNC standard signal output.
g
GPI input terminal (D-sub 9pin)
By assigning functions to each terminal, the monitor can
be controlled by external devices. Connects to GPI
supported external devices.
h
RS-232C terminal (D-sub 9pin)
Controls the monitor connecting to PCs.
Input switching and various adjustments are possible from
connected external devices.
i
HD15 input terminal (mini D-sub15 pin)
Connects devices having a synchronous signal with RGB
output like PCs.
j
S VIDEO input terminal (4pin mini DIN)
Connects devices having S VIDEO output terminals.
k
Potential equalization terminal
This is a terminal for ensuring equal potential between the
monitor and other devices.
Connects equipotential plugs.
l
DC OUT terminal
Please use this terminal when tying to connect a peripheral
equipment.
Rear View
a b c d e f g h i j k
n o q
r
m l p
Rating label
A measuring device or a medical device which is
contacted with patients must not be plugged
into the terminal.
EJ-MLA26_EN_Arthrex.book Page 12 Wednesday, August 8, 2012 11:58 AM