Arthrex AR-8305, Руководство пользователя

Страница: 31 / 56

Operation and Frequently Used Functions
Synergy Resection User’s Guide
DFU-0213-7 Rev. 0 Page 25 of 50
Footswitch Override Screen
The Footswitch Override screen has radio buttons to select the footswitch
override mode for each channel.
At the End User’s discretion, the default setting can be changed so that the
Shaver Handpiece can be controlled by both the Footswitch and/or the Hand
Controls as described below. If both the Footswitch and the Hand Controls are
enabled and activated simultaneously, the Footswitch control will be dominant.
In the default (enabled) mode, the buttons on the hand-control shaver handpiece
will not function when a footswitch is attached to the console. When disabled,
both buttons on the handpiece and the footswitch will function. This screen also
includes Menu, Home and Cancel buttons as described in Table 15 below:
Figure 9 Footswitch Override Selection Screen - Operation
Table 15 Footswitch Override Display - Operation
1.
2.
Channel 1
Channel 2
The software displays the current settings for
footswitch override for each channel with two
sets of radio buttons.
3. Footswitch Override
radio buttons
Each channel has an Enabled and Disabled
radio button, with the factory default set to
Enabled.
4. Menu button When pressed, the software stores the selected
mode and returns to the Menu screen.
5. Home button When pressed, the software stores the selected
mode and returns to the Main screen.
6. Cancel button When pressed, the software returns to the Menu
screen without making any changes.