4
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating.
And make sure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times of the unit’s weight. Also always use a
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people.
2. Technical Specifications
Light Sources:
12 x 40W 4in1 RGBW osram LED
Beam Angle: 6.5°~ 45°
Power Consumption: 500W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 32
*
25.6* 40.1 cm
Net Weight: 12.5 Kgs
Packing size: 50.5x32.5x39cm
Control
DMX Channel: 19/31 Channel
Control Modes: DMX512/mater-Slave/Auto Run/Music
Pan/Tilt
Pan/Tilt: 540°or 360
°
in optional / 270°
Pan/Tilt Resolution: 8/16 bit
One full route of pan finished time is 2.4 seconds
Construction
Display: 180
°
reversible LCD colorful Display
Data In/Out socket: 3-pin & 5-pin XLR sockets
Power Socket: PowerCon in/out
Protection Rating: IP20
13
5.Shape
6. Trouble shooting
Following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if link
