You can also have the unit strobe in this mode.
• Master/Slave Mode- Using the Master unit, choose your desired mode or program and
connect the “Slave” unit or units, All slaves will now follow the“Master” unit. But only one master.
• DMX control mode - This function will allow you to control each individual fixtures traits with a standard DMX 512
controller
Product overview:
(Diagram I)
A B C D
Button Function
<MENU> A Used to access the mode or to return to a previous mode option
<UP> B Change the value of function you choosing in ascending order
<DOWN> C Change the value of function you choosing in descending order
<ENTER> D locate the function of which you want to change the value
Press the Menu button, you can browse all the function, such as AUTO RUN, DMX MODE, SLAVE MODE, SOUND.
While the function you want, for example, if DMX MODE, the ADDR & MODE can be adjusted. You can press Menu
button to catch them, if Menu MODE, it has 23 models, press UP & DOWN to locate it.
Program Mode & Sound Mode:
In Program Mode you can pick your desired factory installed program; static color, color show, color fade, or color cycle.
You can apply a strobe effect to static colors, and control the speed of the color shows, color fade, and color cycle.
1. Plug the fixture in and press the FN button till
d001
display, you are now in program model. Press UP and DOWN to
find your desired effect.
display, and press FN button to enter the DMX address and DMX mode selection, and then
press
UP
or
DOWN
buttons to adjust the DMX
address and DMX mode. The channels value refers to the following
channel summary.
LED WALL WASHER LIGHT DMX Channels Summary
1
．
HOW TO OPERATE?
Press
A
button, there will be nine different modes.
The first two letters stands for functions (refer to Diagram II)
The last two letters stands for DMX address or speed. You can modify it with
B
or
C
button. And press
D
button for
confirmation.
